-40%

Lightweight Flywheel +ARP 4AFE 7AFE 7AGE 4A-FE 7A-FE 6 bolt crank Corolla Celica

$ 162.62

Availability: 20 in stock
  • Condition: New
  • Brand: Matrix Garage
  • Returns Accepted: ReturnsNotAccepted

    Description

    This flywheel fits all 4AFE and 7AFE as well as most other A series 6 bolt cranks.
    It is designed to use the 215mm clutch kits found on later 7AFEs such as 1993 - 1997 Toyota Corolla. It is also the same clutch kit that later 4AGEs used.
    If you have a 200mm clutch and want to run this flywheel you just need to get a 215mm clutch kit and you should be good to go.
    Most lightweight flywheels use the 200mm clutches but we wanted to make a setup that could take more torque and dissipate more heat so we went with the later 215mm 4AGE/7AFE diameter.
    This flywheel weighs 3.6 KG making this one of the lightest flywheels out there. This is slightly offset by the larger diameter clutch which will add a little more weight and moment of inertia than the smaller 200mm clutch. It is also primarily designed for the 7A crank which is heavier and has a greater moment of inertia so we wanted to make this clutch as light as possible to keep the 7A feeling like a light rev happy 4A.
    This is a 6 bolt flywheel plus 6 bolt ARP bolt kit.
    Check out our other auctions for other options.
    We have this flywheel on it's own without the ARP bolts.
    We also have a high performance option that has 6 additional M6 bolt holes machined. You will have to get the additional holes cut in the crank for this option. We recommend this is done by a machine shop but the kit will include drill bushings that will allow a skilled professional to drill and tap the holes in the crank.
    This flywheel will be available with the flywheel, drill bushing and hardware kit, and will also have an option that includes ARP bolts.
    We no longer list returns accepted here because we have had too many issues with people returning things for no good reason or more likely because they did not bother to make sure the part fit or worked properly with their setup. It has become too costly for us and is more often than not due to the customers not paying enough attention or just wanting to try before buying.
    If however there are any issues such as manufacturing defects, out of spec, or so on we will happily work with you to try to resolve the situation.
    If for some other reason you have issues feel free to contact us and we will try to work with you. If for example you order a product for the wrong motor, or something as long as the part is in good condition we will still likely take it back but you would be responsible for all shipping and possibly a restocking fee.