KF04060BK Body Mount Bushing Kit for Ford Super Duty F250 F350 2008-2016 2WD 4WD

Description

KF04060BK Body Mount Bushing Kit for Ford Super Duty F250 F350 2008-2016 2WD 4WD Polyurethane Body Cab Mounts & Steel Sleeves & Hardware
*
Product Introduction:
✔
Fitment
--
Works for Ford super duty 2008-2016 F-250 | 2008-2016 F-350. Precision-engineered to be a direct replacement for factory rubber mounts.
✔
Function -- Used to attach a body and frame, our body mounts are resistant to vehicle fluids and road grime. They outlast factory body mounts and provide more positive attachment to the frame.
✔
Nice Design -- Make it become more effective at isolating the cab from chassis noise and vibration, increasing performance and handling characteristics. Yoursme Body Mounts are the perfect upgrade for worn stock mounts and are particularly beneficial in racing applications.
✔
Superior Material -- Constructed of a special polyurethane blend that helps insulate the cab while maintaining superior holding power. Bring back the confort ride of the OEM body moounts and include OE-style replacement steel sleeves and bolts.
✔
100% Satisfaction Guarantee
-- Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us.
Great Performance:
Maintains proper body and frame alignment
Increases performance and handling characteristics
Vehicle fluid and road grime resistant
Superior to stock replacement rubber mounts
Fitment:
Works for Ford 2008-2016 F-250 | 2008-2016 F-350.
Precision-engineered to be a direct replacement for factory rubber mounts
Nice Design:
Make it become more effective at isolating the cab from chassis noise and vibration, increasing performance and handling characteristics.
Yoursme body mounts are the perfect upgrade for worn stock mounts and are particularly beneficial in racing applications.
Superior Material:
Constructed of a special polyurethane blend that helps insulate the cab while maintaining superior holding power.
Installation Instruction:
All POSITONS
- Remove the bolts from the
passenger side
body mounts and loosen the
driver’s side
body mount bolts, but do not remove them.
POSITION 1
- On the front radiator support bolts, you will need to remove the upper nut on the inside of the radiator support and then you can loosen the lower bolt. A 24” extension with a universal swivel and an 18mm socket works well for this on most trucks. You might need to have someone hold the mounts with large adjustable pliers while you loosen the bolts. On some models, the front bumper must be removed to access the bolts.
Using a floor jack, carefully place the jack on the
passenger side
floorboard support mounts and lift high enough to remove the body mounts. Make sure the cab is securely supported with jack stands before working under the truck or removing anymounts.
ALL POSITIONS
- Remove and replace the
passenger side
body mounts one at a time. Take care not to mix up the pieces. The upper and lower mounts are clipped together on the frame and you may have to use a pair of large screwdrivers to pry the mounts off.
ALL POSITIONS
– Install
kit body mounts
on
kit steel mounts
, Assemble the kit components.
ALL POSITIONS
– When installing the new assemblies onto the frame, make sure they are seated into the frame and centered in the hole.
POSITION 1
– Install
kit body mount
M04060-02
on the top, and
kit body mount M04060-01
along with
kit washer S10126
on the bottom. Run the bolt in from the bottom and start it but don’t tighten it yet. Start the upper nut on the radiator support but don’t tighten it yet.
(
POSITIONS 2, 3, & 4
– Working on one position at a time, install
kit body mount M04060-02
on the
large kit steel
top half and
kit body mount M04060-01
on the
small kit steel
bottom half. Start the bolts but do not tighten.)
Repeat steps 1 through 10 for the
driver’s side
.
Tighten all bolts in an alternating cross pattern (as with tightening wheel lug nuts) until you can feel the stock metal shells seat together (around 45-55 ft. lbs.). Tighten the top nut on the radiator core support mount last.
Reinstall the body cab plugs, and if removed, reinstall the seat, trim, and upholstery.
Reinstall the airbag fuse and reconnect the battery.