FRONT SPLITTER + 2 LONGACRE RODS 2015-2021 CHARGER SRT 392, HELLCAT, & SCATPACK

Description

BEWARE OF CHEAP KNOCKOFFS SOLD BY US VENDORS HERE ON EBAY. THEY ARE MADE OUT OF CHEAP, BRITTLE PLASTIC INSTEAD OF TRACK TESTED AUTOMOTIVE ABS WITH NO INSTALLATION INSTRUCTIONS AND NO MOUNTING HARDWARE. THEY HAVE  NOT BEEN TRACK OR HIGH SPEED TESTED!
Install this Brand new, race inspired & track tested, SBS PERFORMANCE front chin splitter for 2015-2021 Dodge Charger SRT 392s, Daytona 392s, Scat Packs or SRT Hellcats and 2019-2021 Charger R/Ts and GTs with 2 Longacre support rods. Each splitter is made from 1/4" Black automotive ABS plastic. Our splitter bolts directly to the front bumper through the 8 stock bumper/bellypan holes. Adjuster rods connect the splitter to the front bumper, lower grill or inner steel bumper-buyers choice.
SPLITTER INSTALLS WITHOUT NEEDING TO REMOVE THE FRONT BUMPER.
Comes with:
1) 1/4" ABS black splitter 72" x 24".
8) 1 1/2" screws with 1" washers
4) U clips
4) 6 m x 1.0 x 45mm screws.
2) Longacre Racing 8" adjustable Support rods WHICH RETAIL FOR EACH
SUPPORT RODS ARE SHIPPED SEPARATELY FROM THE DISTRIBUTOR.
NOTE: The 2015-2021 Dodge Chargers only have 8 stock bolt points. Because a splitter is a wing, it creates downforce. It is recommended that you add 4 additional bolt points in addition to the stock 8 bolt points. That would require drilling (1/4" drill bit) into the bottom of your car's bumper & belly pan in 4 locations through the splitter's predrilled holes. The optional 4 screws and 4 U clips are included.  EACH SPLITTER IS MADE AFTER YOUR PAYMENT WITHIN 5 BUSINESS DAYS
1/4" solid ABS Automotive Plastic is race tested and is more durable than carbon fiber wrapped splitters and for half the price.
This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created. DO NOT USE THIS Splitter without installing at least 2 spoiler support (adjuster) rods! Returns are accepted only if splitter has not been installed or the incorrect splitter was purchased- based on an incorrect year or model..
Note: The 2 support adjuster rods are shipped separately from the Distributors
Note: We design and manufacture splitters. Support rods are included as a package in this listing as a courtesy. They are drop shipped from their distributors, not shipped with the splitters. We have no control of availability. If at all possible, we use Longacre Support rods, but we may have to drop ship other brand of Support rods like APR or Allstar.FYI: The grainy side of the automotive ABS is the top/upper side of the splitter. The smoother side of the splitter is the bottom. The grainy side is extremely durable. Theses splitters are almost impossible to break which makes it so ideal for this applications. Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic. Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be on top.
Side and rear side splitters are also available from SBS Performance Parts.  https://www.ebay.com/itm/28290870520
Please note that black ABS is a solid plastic that is the actual product color.  This product is designed to have the grainy, textured side facing up or out.  The bottom, smooth side may have some sheen but it is not a finished product and it can scratch easily. The smooth side can be installed facing up or out, only if it is painted or you have a wrap overlaid on it