Blen Dor Dual Control Jeep Blend Door Dash Removal - 99/04 Jeep Grand Cherokee

Description

The Blen Dor Store’s
-
“Blen Dor Dual Control
(dr)
”
For the 1999/2004 Jeep Grand Cherokee with the Automatic Zone Control
(AZC)
systems
This kit
requires
the Instrument Panel
to be
removed
and the HVAC box
opened
.
The driver and passenger side temperature control knobs
will control
their individual blend doors separately, exactly like the original blend doors worked.
See below for a list of the other Blen Dor Store Items
For more helpful information please visit my website
The Blen Dor Store
If you ever have to remove the dashboard to access the HVAC box for other repairs, like to replace the heater core or the evaporator, etc. Or you just want to remove the dashboard to replace the blend doors.
You could replace the existing plastic doors with the
Blen Dor Dual Control
(dr)
kit to divert the future problem of the
blend door failure
.
The Blen Dor Store Dual Control Design
The Blen Dor Dual Control
(dr)
kit will replace the plastic drive connector piece and the plastic blend doors with
solid air craft quality aluminum
parts.
The first piece is the driver side blend door axle shaft.
It is a ½” solid piece of aluminum rod with 1/16” aluminum sheet stock tig welded onto the door axle shaft with six spot welds
(three on each side)
and a 1/4” vinyl foam rubber
(High adhesion strength adhesive with a very good temperature range)
covering applied to both sides of the door panel to make a one piece door assembly.
The second piece is the passenger side blend door axle shaft.
It is a ½” solid piece of aluminum rod with 1/16” aluminum sheet stock tig welded onto the door axle shaft with six spot welds
(three on each side)
and a 1/4” vinyl foam rubber
(High adhesion strength adhesive with a very good temperature range)
covering applied to both sides of the door panel to make a one piece door assembly.
The third piece is the drive connector it is a ½” solid piece of aluminum rod and stainless steel roll pins with the stop pin attached.
The drive connector is machined to fit the actuator motor and to fit onto the end of the driver side blend door axle shaft assembly.
This kit is designed to last longer than the vehicle.
The Blen Dor Dual Control
(dr)
is for the dual control AZC
(Automatic Zone Control)
Systems.
The Blen Dor Dual Control
(dr)
kit will
keep the heater’s dual control
system.
After the heater box is opened remove the driver and passenger side actuator motors and the two white plastic drive connector pieces.
There are only three parts to install.
Put the two part door assembly in place.
Push the drive connector piece into the shaft of the door assembly.
Replace the passenger’s side actuator motor.
Replace the driver’s side actuator motor.
Recalibrate the system.
The job is done!
The driver and passenger side temperature control knobs
will control
their individual blend doors separately, exactly like the original blend doors worked.
I will supply the blend door assembly and the instructions for the installation of the blend doors only.
I do
Not
supply instructions to remove the dashboard and the HVAC box.
Since the HVAC box is opened for the other repairs, you could replace the existing plastic recirc door with the
“
Blen Dor Recirculation Door (dr)”
kit to
divert the future problem of the recirc door failure
.
See the
Blen Dor Recirculation Door (dr)
kit listing for more information.
Guaranteed
for as long as you own the vehicle
.
If a part fails, that part will be exchanged for a new part.
Free shipping of the new exchange part.
The customer
must contact
me by email thru Ebay before returning the part. The customer is responsible for the cost of returning the part.
There
will be
a handling fee of .00 if the item is returned without first notifying the Seller by email thru Ebay.
I will not send a replacement part until I have received the exchange part from the customer.
As soon as I receive the part I will send out the replacement piece.
The shipping and handling time to replace the part will depend on the USPS delivery time, their average delivery time is approximately 5 days within the continental US.
This guarantee does not cover any labor cost incurred to exchange parts.
A note on International Shipping:
I have listed the USPS First Class Mail International shipping in an attempted to provide a lower cost option for International shipping.
If you choose to have your package shipped by First Class Mail International there is no insurance option.
Also the US Post Office’s approximate time for delivery states that it varies
.
That could mean, that your package might be in transit for a few days or a few weeks or more.
If the package is lost there is no recourse, the USPS will not check into lost First Class Mail International.
The only help I could give you is the receipt number and the Customs Form number that would have our names and addresses on it alone with the date of mailing, etc.
Please keep this in mind when choosing to use the USPS First Class Mail International option.
The USPS Priority Mail International
includes insurance
(but not for the full amount)
in the shipping and handling charges.
The estimated delivery time is 6 – 10 days.
“
International Buyers – Please Note -
Customs Duty and Taxes:
The customer is responsible for any customs duty and or any taxes incurred with the sale.
The customer should also be aware of the fact that
if
there is any duty or taxes owed, that the item
could be
held at customs until the duty and or the taxes are paid.
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.”
“These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.”
“We do not mark merchandise values below value or mark items as ‘gifts’ - US and International government regulations prohibit such behavior.”
Send an email if you have any questions about the Blen Dor Dual Control (dr) kit.
***
The
Blen Dor Store
is the
“Industry Leader”
in aftermarket aluminum
HVAC system doors for the
99/04 Jeep Grand Cherokee
***
Check our other listings in the
“
Blen Dor Store
”
for the part best suited to your situation.
The Blen Dor Dual Control
(ndr)
kit.
Keep your dual control system with No dash removal.
The Blen Dor Dual Control
(dr)
part.
Use this kit when you have to remove the dash for other repairs.
The Blen Dor Single Control
(ndr)
kit.
Use this kit when the passenger side actuator motor has failed or a blend door failure where you don’t want to remove the dashboard.
The Blen Dor Recirculation Door
(ndr)
fix.
No dash removal. This would be used when you want to save the time or the cost of removing the dashboard.
!!Free!!
with the purchase of a No Dash Removal blend door item!!
The free item is
included in the two No Dash Removal Combination Items
Previous Blen Dor Store customers who have purchased a no dash removal item are also eligible for the free “Blen Dor Recirculation Door (ndr) fix – But will have to pay shipping costs of .10