11 GPM Log Splitter Pump, LO75 Lovejoy Coupler, and Pump Mount

Description

11 GPM Commercial Duty 2-Stage Hydraulic Pump for Log Splitters
-  Stages: 2
-  GPM: 11
-  Construction: Extrusion Aluminum
-  Max. Operation Speed: 3600RPM
-  Max. Operation Pressure: 4000PSI
-  Shaft Extension: 1.5"
-  Shaft Diameter: 1/2"
-  Keyed Shaft: 1/8" Square
-  Inlet Port: 1.0" Diameter Tube
-  Outlet Port: 1/2" NPT
Mountin
g Bracket/Mount for up to 8 Hp Engines
-  Engine Side Holes: 3-9/16" bolt circle (4 hole pattern) OR 2-1/2" center to center hole distance measured horizontal or vertically (square)
-  Pump Side Hole: 2-3/4" bolt circle (8 hole pattern) OR 2" center to center hole distance measured horizontal or vertically
-  Height: 4-1/16"
-  Coupler clearance hole is 1.790"
-  Square engine side clearance hole is 2" x 2"
-  Powder Coated
-  Sand casted part - will have sand casted texture - pump and engine mount surfaces are machined smooth
All Necessary Hardware to Connect the Pump and Engine
-  This kit comes with the hardware required to connect the pump and the engine
-  Pump Side Bolts:  4 bolts, 2 lock washers and 2 nuts
LO75 LoveJoy Style 3-Jaw Coupler W/ Rubber Spider & Set Screws
-  Commercial duty LO75 3-Jaw coupler
-  Connects pump shaft (1/2" Dia) and engine shaft (3/4" Dia)
-  Set screws provided (put removable thread locker on them before installation)